10
Starting the engine at outdoor temperatures over 10 °C
▪ Before starting the vehicle/engine, insert the remote control / key in the relevant slot (1) with the designation of the
electronic key. Wait until the LED on the ENGINE START/ STOP button (2) changes colours from ORANGE to GREEN
(confirmation of successful detection of the electronic key).
▪ To switch on the ignition, briefly press ENGINE START / STOP.
▪ To start the engine, press ENGINE START / STOP and depress the brake pedal at the same time.
▪ After the engine has been started, press ENGINE START / STOP again to stop it.
For starting the engine at below 10°C, see the “Before winter” section of the operating manual in the “Planned
maintenance” chapter
STARTING THE ENGINE
2
To Next Page
Loading...
