12
Indicator lights
1 Electronic Stability Control (ESC): A flashing light
indicates interference by the system. When the light is
switched on, this indicates a fault in the system.
2 Left blinker
3 Seat belts: When the light is switched on, this indicates
that the belt is not worn when the vehicle is stopped.
When the light is flashing, accompanied by an acoustic
alarm, this indicates that the belt is not worn when
the vehicle is moving.
4 Exhaust aftertreatment: When the light is switched on, this
informs the driver of the quantity, quality and abnormal
consumption of AdBlue®, as well as a fault in the emissions
control system.
5 On Board Diagnose (OBD): Fault indicator
(warning light)
6 Exterior lighting
7 Auxiliary headlight
8 High beam
9 General fault / malfunction indicator
10 General alarm indicator
INSTRUMENT PANEL
11 Fog lights
12 Rear fog lamps
13 Power take-off switched on
14 Instrument panel failure
15 Right blinker
16 Immobiliser activated: When the light is
switched on, this indicates that the system is
activated.
17 Differential lock activated
18 Parking brake activated
19 Hazard warning flashers (flash when switched
on)w
20 Fault in the braking system
21 Engine brake: An activated light
indicates the activation of the system. A flashing light indicates a fault in the system.
22 Intarder: A flashing light indicates that the system must be activated. When the light is switched on, this
indicates that the system is active.
23 Fault in the air suspension
24 Third axle lifted
25 Starting aid
26 Rearview mirror heating
27 LDWS deactivated (if provided)
28 Fault or warning in the tachograph
To Next Page
Loading...
