31
Deactivating the function
▪ By pressing the (3) RES button
▪ By pressing the (5) button
▪ By pressing the “Speed Limiter” (1) button
▪ By removing the key from the ignition lock.
If Cruise Control is deactivated, the speed value (1) will be shown in darker font. The display will be illuminated if it is
reactivated according to the points indicated above.
A visual and acoustic display will appear if function activation is requested, but the conditions are not fulfilled:
▪ When the brake pedal is pressed
▪ When the brakes are overheated
▪ When the electric parking brake or emergency brake has been activated
▪ When he shifter is in the P (park), R (reverse) or N (neutral) position (automatic transmission).
▪ When the engine speed exceeds a maximum threshold value
▪ If an intervention by the ESC system (or ABS, etc.) is ongoing or has just been completed.
CRUISE CONTROL-CC
NOTE: The cruise control function does not replace the vehicle's braking system. Do not set the
transmission to idle while driving with the device switched on.
The system does not regulate and control the alignment of the vehicle. - The driver is
solely responsible for driving operations, and must therefore always maintain control of
all operating elements - in particular the steering, gas pedal operation, and brakes. If the
specification is not complied with, there is a significant health risk and the risk of serious
vehicle damage
To Next Page
Loading...
