To convert one input to an output
Example: Input 1 to Output 3
→ Press INPUTS 1 + OUTPUTS 3
Note: Default status, on first boot up this matrix assigns the IR outputs to the
corresponding HDMI input, meaning, IR out 1 is directly associated to HDMI input 1
and so on. When you switch an HDMI input to a different output, the corresponding
IR OUT will be switched synchronously to allow the IR commands to be sent from
the select zone back through the Matrix Switcher to the source.
To convert an input to several outputs
Example: Convert Input 2 to Output 3, 4 and 5
→ Press INPUTS 2 + OUTPUTS 3 + OUTPUTS 4 + OUTPUTS 5
To convert an input to all outputs
Example: Input 1 to all Outputs
→ Press INPUTS 1 + ALL + ENTER
To Next Page
Loading...