Besides IR control, RS232 control, the Matrix Switcher boasts option TCP/IP port for
IP control.
Default settings: IP: 192.168.0.178; Subnet Mast: 255.255.255.0; Gateway:
192.168.0.1; Serial Port: 4001.
IP& gateway can be changed as you need, Serial Port cannot be changed.
Connect the Ethernet port of control device and TCP/IP port of the Matrix Switcher,
and set same network segment for the 2 devices, users are able to control the
device via web-based GUI or designed TCP/IP communication software.
Control Modes
The Matrix Switcher can be controlled by PC without Ethernet access or PC(s)
within a LAN.
Controlled by PC
Connect a computer to the TCP/IP port of the Matrix Switcher, and set its network
segment to the same as the Matrix Switcher’s.
To Next Page
Loading...