J-TECH JTECH-4K88-EX-RX User Manual

Query Commands
%9962.
Check the power status
STANDBY/PWOF
F/ PWON
%9963.
Check the working mode of infrared
carrier.
Carrier native/
Force carrier
%9964.
Check the IP address.
IP:192.168.0.178
(default)
%9971.
Check the connection status of the inputs.
In 01 02 03 04
Connect Y Y Y Y
In 05 06 07 08
Connect Y Y Y Y
%9972.
Check the connection status of the
outputs.
Out 01 02 03 04
Connect Y Y Y N
Out 05 06 07 08
Connect N Y Y Y
%9973.
Check the HDCP status of the inputs.
In 01 02 03 04
HDCP Y Y Y N
In 05 06 07 08
HDCP Y Y Y Y
%9974.
Check the HDCP status of the outputs.
Out 01 02 03 04
HDCP Y Y Y Y
In 05 06 07 08
HDCP Y Y Y Y
%9975.
Check the I/O connection status.
Out 01 02 03 04
In 07 07 07 07
Out 05 06 07 08
In 07 07 07 07
%9976.
Check the output resolution.
Resolution
Out 1
1920x1080p
……
Out 8 1920x1080p
%9978.
Check the HDCP compliant status of the
inputs.
In 01 02 03 04
HDCPEN Y Y Y Y
In 05 06 07 08
HDCPEN Y Y Y Y
RS232 CONTROL COMMANDS
22

J-TECH JTECH-4K88-EX-RX Specifications

General

Brand	J-TECH
Model	JTECH-4K88-EX-RX
Category	Switch
Language	English