JAC J2 User Manual



Maintenance Manual for J2 Sedan
Service
8
Chapter
II
Service
Section
I
Service
I. Preparation
1.
Maintenance
Tools
List of Maintenance Tools
No.
Tools
Outside
View
Description
1 Power tool
For dismantlement and
installation of bolts and
nuts
2
Ignition plug
socket
For dismantlement and
installation of ignition
plug
II.
General
Service
General Service means the inspection and maintenance items which should be performed everyday
during normal use of vehicles. These
service items are ver
y important, for
normal operation performan
ce
of vehicle. The owners can perform these inspections by themselves, or go to a JAC franchised store for
assistance. Followed is content of general service:
1. Exterior
of
Vehicle
The following inspection and maintenance items should be
frequently conducted.
List of Items to be Frequently Inspected for the Exterior of Vehicle
Item Inspection
Tyre
Use
an
air
gauge to
inspect
the
pressure
of
tyres
(including
spare
tyre)
in
the
service
station regularly; adjust pressure in accordance with technical data if necessary. Check
whether there’s any da
mage, crack or exc
essive worn tear carefu
lly.
Windsh
ield
Clean
the
windshield
regularly.
Check
whether
there’s
any
crack
or
other
damage
of
the
windshield every six m
onths or more fre
quently. Repair as re
quired.
Windshield
wiper blade
If the wiper doesn’t work efficiently, check for worn or torn.
Door and
engine hood
Check whether all of the doors, engine hood, boot cover and tail door can be normally
opened and closed normally, whether all the door locks are locked closely. Lubricate as
required. Moreover, If the vehicle often travels on the salt-spread roads or in the areas
with corrosive substances
, always inspect lubr
icating conditio
ns.
Tyre exchange
The tyre exchange should be conducted
after eac
h 8000 km traveling.

JAC J2 Specifications

General

Brand	JAC
Model	J2
Category	Automobile
Language	English