Maintenance Manual for J2 Sedan
Mechanical Part of Engine
■ When
dismount all accessories such as cooling
fan, wind collection cover and horn. Then wrap up the harness connectors with adhesive tape to
er from flowing in.
ash back of radiator core
2)
each surface of
core
3) If no dirt is washed off ra
ing must be stopped.
downwards with compressed air
5)
surface of radiator core with compressed air
is blown
.
1) Dismantlement
air intake pipe
it off.
Attention:
■
or
Install in the reverse order with dismantlement.
2.
and
cover.
2) Check after
Check the cooling fan for cracks or abnormal bend. If any, replace the cooling fan.
Check the motor for sticking.
Assemble in the reverse order with disassembly.
.
To Next Page
Loading...
Need help?
General
