Maintenance Manual for J2 Sedan
10
Service operational code:
I-examination; R-replaceme
Service cycle (odometer readings and the number of months, whichever comes first)
1000km 1 10 20 30 40 50 60 70 80 90 100
6 12 18
30 36 42 48
60
I: every 10,000 km or 6 months
R: every 60,000 km or two years
2
Check oil and gas control systems of
crankcase for normal working
I I
3 Spark plug I I R I I R I I R I
4 Change coolant R R R R R
General conditions
use C: every
R: 15,000km
Harsh
use C: every
R: 10,000km
General conditions
use R: every
km or
months
Oil and oil
Harsh
use R: every
km or 3 months
7 Carbon monoxide content
engine idling I I I I I I I I I I
8
I I I I I
9 Hose I I I I I I I I I I
10 Exhaust fittings leakage I I I I I I I I I I
11 Throttle
C C C C C
12
13
alve clearance I I I I I I
C *---For cleaning operation of fuel injector, it is recommended that dedicated fuel injector cleaning
analyzer is used; Check every
5000km; if there are nozzle clogging or blockage failures and
they are non-product quality problems, they should be maintained at users’ expenses.
"Harsh conditions of use" specifications are only used in severe conditions of use of vehicles. Harsh
conditions of use include the
Driving in dusty areas or the vehicle is regularly exposed to salty air or
Driving on rugged road, r
oad with water accumulation or on mountain roads.
In the cold season, the engine idles a long time or
used frequently in short-distance traveling.
Frequent use of brakes, regular emergency braking. .
32
℃
, driving in urban heavy traffic for more than 50% of the total travel