JAC J2 - Precautions; Section II Engine Lubrication System



Maintenance Manual for J2 Sedan
Mechanical Part of Engine
92
Section II Engine Lubrication System
I. Precautions
Application Steps of Sealant:
1.

Remove any old sealant on the seal gasket by using scraper.
Attention:
■
Thoroughly r
emove old s
ealant from
grooves,
fixed bolts
and bolt holes
on sealant
application
surface.
2.

Wipe sealant surface and matching surface clean with special cleaner, remove water drops, grease
and foreign substances.
3.

Set the sealant with specified type completely on appointed position.
1)
Install the
matching parts
in
a
certain period
of time
after sealant
applied.
2) If there is
any
dirt on sealant, remove
immediately.
3)
Do
not
retighten
the
bolt
and
nut
after
installation.
4)
Fill
oil
and
coolant
30min
after
installation.
Fig. 1.2.001
Scraper
