Maintenance Manual for J2 Sedan
12
Part
Method
Generator belt
bolt of
belt
■
as
■ During installation
ke sure
is in correct engagement with
■
e
on
■ Do not over wind or bend belt
ed bel
aware of mounting direction.
3.
Coolant of
■
never
■ Wrap the radiator cap
cloth and unscrew it carefully. Release
inside
and then completely unscrew it to op
■
are not to
1) Drain engine
Open the water drain
he cap of radiator.
If necessary, please dismount coolant reservoir, drain the engine coolant, and reinstall it after
cleaned.
Check if there’s any foreign
matter such as rust or any color change in the discharg
■
Refill
coolant
Reinstall dism
lant reservoir and the drain plug of radiator.
■
Dismount the upper cover of air filter and the intake hose. Please refer to “Air Filter Assem
Disconnect outlet tube of heater pipe. Please lift the hose as high as possible.
Fill coolant into radiator and coolant reservoir to speci
illed
slowly, such as to gradually bleed air from the system.
■
“Recommended Oil and Lubricant”.