EasyManuals Logo

JAC J2 User Manual

JAC J2
243 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
Maintenance Manual for J2 Sedan
Mechanical Part of Engine
97
2) Installation
Remove
any foreign substances
attached
on
mounting surface of oil filter.
Apply a
film of
engine
oil on
oil seal surface
of new oil filter.
Tighten the oil filter
until the
O-ring seating
on the installation surface; tighten the oil filter
by more 0.75 lap or get the tightening torque
to 11 ± 1N • m.
Attention
:
The oil
filter
must
be
tightened
with
filter
spanner.
If the
filter is
tightened by
hand, oil
leakage may occur due to inadequate tightening
torque.
2. Check after
Installation
1)
Check
oil
level.
Please
refer
to
“Engine
Oil”.
2)
Start
engine
to
check
whether
there
is
oil
leakage.
3) Stop
engine
and wait
for
10min.
4) Check oil level and fill as required. Please refer to
“Engine Oil”.
Fig. 1.2.006

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JAC J2 and is the answer not in the manual?

JAC J2 Specifications

General IconGeneral
BrandJAC
ModelJ2
CategoryAutomobile
LanguageEnglish

Related product manuals