JAC PICOMATIC 450 - Page 20

English
20
Should the problem persist, please contact your technician.
11.2 Machines without a
screen
Flashes or code displayed on
screen
Problem description
Action
2
Cut-out SECU1 tripped during cycle.
Please restart the
machine using the
emergency stop (fig.1,
n°5). Should the problem
persist, please contact
your technician.
3
Current to upper actuator (M2) in excess of
6 A for 1 second, during advance/cut.
4
Cut motor thermal cut-out (F3) tripped.
5
No actuator (M2) movement despite tension set
to maximum.
6
Loaf pusher not in initial position. Limit switch S1
not tripped.
7
Advance/cut cycle time in excess of 60 seconds.
8
Return cycle time in excess of 30 seconds.
9
Rear (S1) and front (S2) limit switches tripped at
the same time.
10
Current to upper actuator (M2) in excess of 5 A
for 1 second during carriage return.
11
Front safety cover (S3) open in the course of a
cycle.