JAC PICOMATIC 450 - 11 Error Codes; Machines Equipped with a Digital Display

English
19
11 ERROR CODES
11.1 Machines equipped with a digital display (MRK – MRF – MRL ETL)
Message displayed on screen
Problem description
Action
STOP! CHECK PHOTOELECTRIC
CELL
Photoelectric cell (S5) beams broken
Please restart the
machine using the
emergency stop (fig.1,
n°5). Should the problem
persist, please contact
your technician.
DRAWER STOP OPEN
CLOSE DRAWER
Crumb tray (S7) open
MOTOR OVERHEATING STOP
WAIT!!!
Blade motor thermal cut-out (F3)
tripped
PRESS START TO
REPOSITION THE MACHINE
Loaf pusher not in initial position (S1)
COVER OPEN
CLOSE COVER
Safety cover open (S6)
FILL CUTTING OIL TANK
Oil top-up required in loaf pusher
0 CUTS REMAINING BEFORE
BLADE REPLACEMENT
Blade replacement required.