i
Revision
Letter
Revision
Date
Made by Applicable ECNs Details
A 04-17-13 RLC ECR 8259 Release to Production.
B 02-20-14 MHH QOF NDB 229 Updated control, wash and strainer assemblies. Updated schematic.
C 06-27-14 MHH 8301 Updated Schematic.
D 07-02-14 RC QOF-NDB-266 Removed Ventilation Requirements.
E 07-30-14 KAP QOF 386 Updated Schematic.
F 10-14-14 KAP ECR-8318 pg. 28. Added: 480 V Heater Gasket P/N - 05330-004-13-19,
480 V Heater P/N - 04540-004-12-29.
pg. 31-32 Added: 480 V Control Box and Legend.
pg. 40 Added: 480 V Units P/N - 05330-011-47-79,
480 V Units P/N - 05700-004-13-25, 480V P/N - 04540-004-13-30.
pg. 41 Added: 480 V Units P/N - 06105-004-07-54.
G 02-04-15 KAP N/A Updated water pressure info on pgs. 4 and 5.
H 02-13-15 KAP N/A Updated PLC screens on pgs. 14, 16, 18, 21, and 22.
J 03-11-15 KAP N/A Updated Drawings on pg's. 35, 36, 41, 43, 46.
Changed item #18 description on pg. 42.
Added VAC breaker Repair kit P/N on pg. 43.
Added wash arm assembly on pg. 40.
Corrected P/N for item #5 and #6 on pg. 31.
Added lower oat switch on pg. 29.
Updated description for item # 10 on pg. 39.
Updated description for item # 1 & 2 on pg. 35.
Updated 208/230 schematic on pg. 51.
K 04-01-15 KAP N/A Updated P/N for item #6 on pg 31.
L 04-15-15 KAP ECR - 8328 Updated transducer and harness P/N pgs. 42 and 44.
Updated 208/230 V and 480 V Electrical Diagrams pgs. 51 and 52.
M 05-18-15 KAP N/A Updated P/N for item #6 on pg. 36.
Updated P/N for item #19 on pg. 36.
Included door spring in drawing on pg. 36.
Updated oat switches pgs. 17 and 30.
Updated item #4 P/N on pg. 37.
Updated Door Spring Assembly pg 36 and 37.
N 06-10-15 KAP N/A Added 2 wire door switch cable pg. 27.
07-09-15 KAP N/A
Updated plumbing inlet on pgs. 1, 26, 29, and 42.
Added left shroud P/N on pg. 36.
Added item #11 ribbon to PLC harness to control kick panel on pg. 31.
Added note regarding hose length on pg. 49.
P 09-22-15 KAP N/A
Updated Kick Panel Control on pg. 31.
Updated 208 V Control Box on pg. 32 and 33.
Q 12-07-15 JH ECR-8365 Added callout/P/N for two scrap baskets, item #25 on pg. 38.
Changed top view on pg. 43 to show offset rinse hub (item #8) and p-clip (item #9).
Added view of chemical port and warning to pg. 7.
Changed views on pg. 44 to show new transducer location and added a view for the
optional pressure regulator.
Changed views on pg. 1 to show updated dimensions and added a top view.
Changed 208 and 480 schematics to latest revision.
REVISION HISTORY
To Next Page
Loading...
