2
Aenon New Swim Spa Owner
Congratulaons on the purchase of your new Jacuzzi® swim spa. The following is a list of
automated funcons performed by your swim spa. These funcons are listed below in an
aempt to suppress any operaonal concerns you may have during the first 24 hours of
ownership. Also listed below are important maintenance recommendaons you should
observe on a regular basis to protect your new investment.
Maintain Healthy Swim Spa Water
Always maintain your swim spa’s water chemistry within the following parameters:
With CLEARRAY® ACTIVE OXYGEN Without CLEARRAY® ACTIVE OXYGEN
pH 7.4—7.6 7.4—7.6
Free chlorine No less than 1.0 ppm 3.0—4.0 ppm
Free bromine No less than 2.0 ppm 2.0—4.0 ppm
Total Alkalinity 100—150 ppm 100—150 ppm
Calcium Hardness 150—250 ppm 150—250 ppm
IMPORTANT: CLEARRAY® ACTIVE OXYGEN Water Management System is factory installed. If the CLEARRAY®
ACTIVE OXYGEN system is altered or is not operang efficiently then follow the “without CLEARRAY® ACTIVE
OXYGEN water chemistry parameters as defined by the Associaon of Pool and Spa Professionals.
CLEARRAY® ACTIVE OXYGEN requires an annual bulb replacement to properly sanize your water.
TO DECREASE RISK OF INFECTION OR DISEASE! Always maintain your spa
filters as outlined below to ensure healthy spa water.
Required Filters Maintenance
Your new swim spa is equipped with an advanced water filtraon system that provides
unsurpassed water quality! To ensure maximum water quality at all mes, you should clean
the skimming filter cartridge every 3 months, or as necessary.
Required Water Replacement
You should replace the swim spa’s water every 3 months. The frequency depends on a num-
ber of variables including frequency of use, number of users and aenon paid to water
quality maintenance. You will know it is me for a change when you cannot control sudsing
and/or you can no longer get the normal feel or sparkle to the water, even though the key
water balance measurements are within the proper parameters.
© Jacuzzi Hot Tubs, Inc. All Rights Reserved