Jacuzzi J-13 - The Se Ngs Screen

38
11.4 The Sengs Screen
The Sengs Screen is where all programming and other swim spa behaviours are controlled.
Each icon on the Sengs screen takes you to a different screen, where one or more seng
may be viewed and/or edited.
The Heat Icon takes you to a screen where you control the
Dual Temperature Ranges
High vs. Low
This system incorporates two temperature range sengs with independent set temperatures.
The specific range can be selected on the Sengs screen and is visible on the Main Screen in
the upper le corner of the display. These ranges can be used for various reasons, with a
common use being a “ready to use” seng vs. a “vacaon” seng. Each range maintains its
own set temperature as programmed by the user. This way, when a range is chosen, the swim
spa will heat to the set temperature associated with that range.
High Range can be set between 81
o
F (27
o
C) and 104
o
F (40
o
C)
Low Range can be set between 50
o
F (10
o
C) and 98
o
F (37
o
C)
Freeze Protecon is acve in either range.