Jacuzzi J-13 - 5 General Electrical Safety Instruc Ons; 6 Electrical Installa on Instruc Ons (230; 240 Volt Service)

15
 Warranty: Damage caused by not following these guidelines or any improper installaon
not in accordance to local codes or authories is not covered under the swim spas
warranty. Please consult your local state or city building ordinances.
 When possible, do not shim the swim spa. To ensure proper support the swim spa must
sit flat on the intended foundaon.
5.0 General Electrical Safety Instrucons
Your new Jacuzzi® swim spa is equipped with the ProTouch™ keypad control
system. It contains the most advanced safety and self-protecve equipment in
the industry. Nonetheless, this swim spa must be installed properly to ensure dependable
usage. Please contact your local Jacuzzi® dealer or local building department should you have
any quesons regarding your installaon.
6.0 Electrical Installaon Instrucons (230V / 240V Service)
IMPORTANT NOTICE: The electrical wiring of this swim spa must meet the re-
quirements of any applicable local codes. The circuit must be installed by a
qualified electrician and approved by a local building/electrical inspecon authority.
It is the responsibility of the installer to select materials based on their intended use, to carry
out work properly, to check the condion of the system that the unit will be connected to and
that it ensures safety of use also concerning maintenance work and the possibility to examine
the system.