Jands HP12 User Manual

MODE 2: TERMINATION, CHECK, VOLTAGE COMPENSATION & LOCK
[10]
DISPLAY = "CH1*DMX-1*Level-
19*Volt-240*Law-Linear power*
Preheat-Off*Preheat value-
E*Status-Enabled"
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Voltage compensation applied Voltage compensation not applied
DMX Termination
Term "On" Term "Off"
DMX terminated DMX not terminated
From "P.FLT"
[10]
ENTER
ENTER
ENTER
ENTER
Dimmer Parameter Readout Mains Voltage Compensation
ENTER
ENTER
Dimmer locked
ENTER
ENTER
Dimmer unlocked
Turn left for
1 step
Turn right for
1 step
Turn right for
1 step
Dimmer user lock
NORMAL
Adjust to scroll
through channel
Figure 4.1 B

Jands HP12 Specifications

General

Brand	Jands
Model	HP12
Category	Dimmer
Language	English