Page 4
Service
If there are questions, which are not described
in this manual, please contact us directly.
For an efficient handling we need the following
information:
- Description of device (see type plate),
- Serial digit (see type plate),
- Software Release,
- Measuring and operating voltage and
- detailed description of error.
Hints for maintenance
Before delivery the device is tested in various
safety checks and marked with a seal. If the
device is opened, these checks must be re-
peated.
For instruments, which are opened outside the
manufacturing works, no warranty is granted
whatsoever.
Repairing and calibration
Repairing and calibration work can be carried
out in the manufacturing works only.
Front foil
The cleaning of the front foil has to be effected
with a soft cloth using a common cleansing
agent. Acid or acidic agents are not allowed for
cleaning.
Waste management
The UMG96L can be disposed and recycled as
electronical waste according to the legal regu-
lations.
To Next Page
Loading...
Need help?
General
