Janome 1110DX - Setting the Lower Looper Pre-Tension Setting Slider and Changeable Thread Guide

30
STD. R.H.
STD. R.H.
Setting the Lower Looper Pre-Tension
Setting Slider and Changeable thread guide
Standard serging(STD.)
Standard serging with 2, 3 or 4 threads
q Lower looper pre-tension setting slider
Rolled hemming(R.H.)
Rolled hemming with 2 or 3 threads
q
3/4
2
3/4 thread serging
Serging with 3 or 4 threads
w Changeable thread guide
2 thread serging
Serging with 2 threads
Change the setting depending on whether you’re doing 3/4
thread serging or 2 thread serging.
3/4
2
w