Janome 1110DX - Threading the Upper Looper

42
• Threading the Upper Looper
Place a spool of thread on the rear right spool pin.
*
The points to thread for upper looper are marked
in red.
*
A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the thread guide second
from the right from back to front.
1
Thread guide
2
1
2
1
2
3
4
1
2. Pass the thread through the holes in the second
row from the right of thread guide plate as
illustrated.
2
Thread guide plate
5
6
7
8