Janome AT2000D - Threading the Right Needle

28
(A) (B)
q
w
e
r
r
t
z
x
c
z
x
c
Threading the Right Needle
z Draw the thread through the thread guide from back
to front: (A)
q Thread guide
x Slide the thread under the top cover thread guide as
illustrated.
w Top cover thread guide
c Pull the thread along the slit.
Using both hands, insert the thread between the
tension disks of the right needle thread tension dial.
e Thread
r Tension disk
t Right needle thread tension dial
NOTE:
Raise the presser foot lifter for easier threading.
CAUTION
Turn the power switch OFF before threading the
machine.
NOTE:
If the thread tends to slip away from the guide while
sewing, pass the thread through both thread guide
holes as shown: (B)