Janome DC6030 - Altering the Needle Drop Position; Altering the Stitch Length

22
(7.0)
(3.5)(0.0)
Altering the needle drop position
The needle drop position can be altered for straight stitch
patterns 01 to 05 and 19.
Press the “–” sign on the stitch width adjusting button to
move the needle to the left.
Press the “+” sign on the stitch width adjusting button to
move the needle to the right.
q Stitch width adjusting button
Altering the stitch length
The stitch length can be altered.
Press the “+” sign on the stitch length adjusting button to
increase the stitch length.
Press the “–” sign on the stitch length adjusting button to
decrease the stitch length.
w Stitch length adjusting button
NOTE:
Reverse stitch length cannot be set longer than 4.0.
q
w