Janome Memory Craft 3000 - Board K Attaching and Removing

Boards F and K attaching and removing
Board K
(TO REMOVE)
1. Remove the front panel unit (See page 4).
2. Remove the 9 screws (A).
3. Pull out the connector (B) from board K and remove Board K.
(TO ATTACH)
4. Follow the above procedure in reverse.
BOARD F
(TO REMOVE)
1. Remove the front panel unit (See page 4).
2. Pull out the connector (B) from Board K.
3. Remove 2 screws (C) and Board F
(TO ATTACH)
4. Follow the above procedure in reverse.
24