Janome Memory Craft 3000 - Base & Bed Cover Attaching and Removing

Base & bed cover attaching and removing
BASE (Y)
(TO REMOVE)
1. Remove 6 screws (A) and base.
(TO ATTACH)
2. Attach the base with 6 screws (A).
BED COVER (Z)
(TO REMOVE)
3. Move the drop lever to the left, then remove 2 screws (B).
4. Remove the bed cover.
(TO ATTACH)
5. Move the drop lever (C) to the left and attach the bed cover with 2 screws (B).
2