janome.com
Page 45
3. Plug the DC power cord from the
power adapter into the side of the
bobbin winder (Figure 3).
4. Plug the AC power cord into the
power adapter (Figure 4).
5. Plug the other end of the AC power cord into the
wall outlet (Figure 5). Note: The power adapter
enables the bobbin winder to work in all countries
with the appropriate power cord for that country
and without the need of a transformer or similar
adapter. Contact your local Janome Dealer to
obtain the appropriate power cord.
Figure 3
Figure 4
Figure 5
To Next Page
Loading...
