JBI Alpha-Doc Mk4 - 9. Selling, Transferring or Disposing; Selling or Transferring the Machine; Disposing of the Punching Machine

Section 9 Page
9. Selling, Transferring or Disposing of your Punching Machine
ALPHA/M4/V1 SEPT 2011
1
9.1 Selling or Transferring your Punching Machine
If you sell or transfer your punching machine you must ensure that the machine is in
working order, and that the labels and this manual are in legible condition.
Failure to do so could result in you being responsible to whom you sell or transfer
your punching machine should it cause personal injury or damage to property.
9.2 Disposing of your Punching machine.
If you dispose of your punching machine you must destroy it, as follows, before you
throw it away :
9.2.1 Remove punching tool
9.2.2 Remove the Electrical Module Assembly
9.2.3 Remove the confetti tray
9.2.4 Cut the linking cables
9.2.5 Remove the inverter and the 24VC card of the Electrical Assembly.
9.2.6 Throw away the punching tool, the electrical assembly, the confetti tray, the
linking cables, the inverter and the 24VC card in a separate location to the
rest of the machine.