Section 8 Page
8. Maintenance
ALPHAM4/V1 SEPT 2011
1
When the machine runs on a normal basis, namely 8 hours a day, the tool has to be
lubricated once a week with the oil can which is supplied with this tool.
VERY IMPORTANT
- Check each week that there is no stray confetti inside the
table underneath the tool (don’t forget to empty the confetti
tray regularly)
- When you replace the tool ensure that it is in the lowered
position (see Section 5.4).
Drip some oil drops in the
purpose made holes
The oil felt pad has to be damp
To Next Page
Loading...
