Section 2 Page
2. General
ALPHAM4/V1 SEPT 2011
3
2.3 Paper Jams
If the paper jams repeatedly at the outlet :
2.3.1 Check the direction of the warping of the paper located in the feeder and
compare this with the tolerances mentioned in Section 2.2.2.
2.3.2 In case you have to cope with one or more situations, turn your paper so
that you obtain either case no. 1 or 3. It will improve both the pick-up of
the paper and the reception.
2.3.3 Check whether you meet the aforementioned restrictions (see Section
2.2).
2.3.4 Always use a paper of good quality if possible.
2.3.5 When the paper has just been photocopied, it is advisable to let it cool
down for a quarter of an hour before punching it.
CAUTION
The storage of the paper before punching is of great
importance : on cooling the paper may be susceptible
to warping, hence the importance of stacking the paper
correctly.
To Next Page
Loading...
