JBI Alpha-Doc Mk4 - 2. General; Working Speed and Mode; Paper Tolerances

Section 2 Page
2. General
ALPHAM4/V1 SEPT 2011
1
2.1 Working Speed and Mode
The machine is equipped with three working speeds and four working modes as
shown below and whose selection is possible on the keyboard of the machine.
a. Speed (90) : plain good quality copying paper 90 strokes per minute
b. Normal (80) : plain copying paper 80 strokes per minute
c. Card (70C) : plain copying paper with card board 70 strokes per minute
d. Index (70I) : tab sheets 70 strokes per minute
2.2 Paper Tolerances
2.2.1
G.S.M. BRACKET
(weight of the paper per square meter)
Between 70gsm and 250gsm
MINIMUM SIZE OF PAPER
138mm x 138mm
MAXIMUM SIZE OF PAPER
350mm x 330mm
MAXIMUM TOLERANCE OF PAPER SIZE
IN THE SAME PILE
0.5 mm