Need help?Do you have a question about the JBL KX100 and is the answer not in the manual?
Provides essential warnings and instructions for safe operation, handling, and environment.
Details FCC compliance and guidelines for avoiding radio frequency interference.
Covers proper power cord connection, grounding, and product disposal requirements.
Lists product compliance with safety and EMC directives and relevant standards.
An overview of the JBL KX100 karaoke processor's purpose and features.
Provides the official website for product information and distributor contacts.
A concise, step-by-step guide for initial setup and operation of the KX100.
Explains the function of each button, display, and knob on the unit's front panel.
Details the types and functions of all input and output jacks on the rear panel.
Describes the functionality of each button on the included infrared remote.
Instructions and codes for programming third-party remote controls for the KX100.
A guide to navigating the KX100's menu system and adjusting parameters using the controls.
Outlines the available audio processing for microphone, music, and speaker outputs.
Parameters for the AGC function, which manages input level consistency.
Settings for routing microphone or music signals to the center channel output.
Parameters for optimizing subwoofer performance for dance or karaoke modes.
Adjustments for speaker signal delay to ensure time alignment across outputs.
Details on Echo effect parameters, including type, delay, and feedback controls.
Information on the automatic Feedback Elimination (FBE) feature and its activation.
Parameters for the Limiter function, used for speaker protection and preventing clipping.
Parameters for the Mic Exciter, which enhances vocal clarity and high frequencies.
Parameters for the Noise Gate, designed to reduce unwanted background noise.
Details on Parametric EQ settings for shaping the tonal characteristics of audio signals.
Parameters for the Pitch shifter, allowing adjustment of music source pitch for vocalists.
Explains Reverb parameters, including types and settings for ambient effects.
Covers parameters related to specific audio/video input sources and signal levels.
Details parameters for center, subwoofer, and crossover output level and frequency settings.
Describes utility functions such as remote input selection, LCD contrast, and EQ linking.
Instructions for connecting to the PC software for control and firmware updates.
Step-by-step procedure for restoring the KX100 to its original factory default settings.
A schematic illustrating the internal hardware components and their interconnections.
A diagram showing the signal flow and processing stages within the digital signal processor.
Lists the technical specifications for audio, video, power, and physical characteristics.
To Next Page
General
