JBL KX100 - 3.14 Additional Input Parameters

23
KX100
Section 3
Processing & Parameters
3.14 Additional Input Parameters
There are some parameters which don’t necessarily pertain to any of the processing algorithms
previously listed, but do pertain to certain inputs. This sub-section covers these additional
input parameters.
• VOD - Selects the VOD audio and video inputs as the source.
• DVD - Selects the DVD audio and video inputs as the source.
• BGM - Selects the BGM audio and video inputs as the source.
• AUTO - This option uses auto detecting to automatically select the source. The detector
uses a priority system to determine which input has priority over the others. The order
of priority is: 1. VOD, 2. DVD, 3. BGM (where 1 is highest priority and 3 is lowest
priority). This means if signal is present at both the VOD and DVD inputs, the VOD
input will be selected as the source as it has higher priority than the DVD input. When
there is no longer signal present at the automatically selected input, the detector will
automatically switch to the next priority down which contains signal. If there is no
signal present at any inputs, no switching will occur.
• Mic Volume (Off, -47 dB - +6 dB) - This parameter allows you to adjust the volume of
the mic sources. This parameter is also adjustable from the front panel Mic knob.
• Mic INI Volume (Off, -47 dB - +6 dB) - This parameter allows you to set the initial
Mic Volume value. This is the default value that the Mic Volume will be set to each time
the processor boots up.
• Mic Max Volume (Off, -47 dB - +6 dB) - This parameter allows you to set the
absolute maximum limit in which the Mic Volume or Mic INI Volume can be set.
• Music Balance (L100 - Center - R100) - This parameter allows you to adjust the left/
right balance of the music inputs.
• Music Volume (Off, -47 dB - +6 dB) - This parameter allows you to adjust the volume
of the music sources. This parameter is also adjustable from the front panel Music
knob.
• Music INI Volume (Off, -47 dB - +6 dB) - This parameter allows you to set the initial
Music Volume value. This is the default value that the Music Volume will be set to each
time the processor boots up.
• Music Max Volume (Off, -47 dB - +6 dB) - This parameter allows you to set the
absolute maximum limit in which the Music Volume or Music INI Volume can be set.
• Effect Volume (Off, -47 dB - +0 dB) - This parameter allows you to adjust the volume
of the effect. This parameter is also adjustable from the front panel Effect knob.
• Effect INI Volume (Off, -47 dB - +0 dB) - This parameter allows you to set the initial
effect volume value. This is the default value that the Effect Volume will be set to each
time the processor boots up or another preset is loaded.
• Effect Max Volume (Off, -47 dB - +0 dB) - This parameter allows you to set the
absolute maximum limit in which the Effect Volume or Effect INI Volume can be set.