JBL KX100 - 4.5 Specifications

29
KX100
Section 4
Appendix
4.5 Specifications
Audio Inputs
MIC Input Type: XLR & ¼” balanced or unbalanced
Impedance: 600 Ohm
EIN: > 113 dB, 20 kHz Bandwidth
Level Control: 0 to +33 dB
Line Input Type: RCA unbalanced left & right
Impedance: 24K Ohm
Audio Outputs
XLR Output Type: Balanced or unbalanced
Level: + 4 dBu Nominal, +20 dBu Maximum
Impedance: 30 Ohm balanced, 15 Ohm unbalanced
RCA Output Type: RCA unbalanced left & right
Level: -10 dBv Nominal
Impedance: 100 Ohm
Audio Performance
Frequency Response: 20 Hz to 20 kHz, +/- 1 dB
THD+ N: <.007% 20 Hz – 20 kHz
Dynamic Range: >103 dB
A/D Conversion: 24 bit, 48 kHz
DSP Processor: 24 bit
Video
Video Standard: CVBS
Input Impedance: 75 Ohm
Output Impedance: 75 Ohm
Output Level: 1V p-p
Bandwidth: 10 MHz
Infrared Receiver
Carrier Frequency: 38 kHz
Format: NEC
Internal
Distance: 15 m
Angle: +/- 30º
External: 1/8” TRS Jack
Distance: Device dependent
Angle: Device dependent
Other
Computer Connection: USB 2.0
Power: 9V DC @ 2 A
Weight: 3.75 lb