JDE PRMSS-001 - Page 32

32
Repeattheboilerdrainingsteps:
• Remove the drip tray and pull the drain hose
out.
• Place drain hose over a 10L bucket.
• Remove the cap from the hose.
• Turn the drain valve counterclockwise to open.
• Close the drain valveclockwise to close when
the water has stopped to ow out of the hose.
• Reinstall the cap to the hose.
• Put the drain hose back and reinstall the drip
tray.
Repeattheushingprocedure:
• Place the included container on the cup tray
under the drink outlet.
• Press [connue] in the touch screen to
proceed.
• Remove and empty the container when the
display shows the message ‘EMPTY FLUSH BIN’
• Press [connue] in the touch screen to pro-
ceed. Flushing will connue.
• Remove and empty the ush bin when the
ow of water has stopped.
Tocompletethedescalingprocedurehereaer:
• Remove the funnel from the descale opening.
• Place the cap over descale opening
• Remove the operator USB key
• Rell the water tank (watertank version only)