JDS Uniphase MAP EDFA OAB 1550 - How to Query the Laser Current on the Cassette

30
How to Query the Laser Current on the Cassette
COMMAND :SOURce:CURRent:OUTPut?
DESCRIPTION Query the laser current ( % of maximum laser current ).
INPUT FORMAT :SOURce:CURRent:OUTPut? <C>,<S>,<D>
INPUT RANGE
OUTPUT FORMAT <Output>
OUTPUT RANGE <Output>*
Float 0 - 100%
*resolution is 0.1%
DEFAULT N/A
EXAMPLE The following example query the laser current value on chassis 2, slot
8, device 1.
Terminal Input: :SOUR:CURR:OUTP? 2,8,1
Terminal Response: 80
ERRORS
Error Number Error Description
-500
Invalid address or no card inserted.
-520
Invalid mode (device is not in current
mode)
LOCAL INTERFACE
• Highlight “OA”
• Press ‘Enter’ ( Q )
• Laser Current will be displayed
• Press ‘Exit’ ()”