43
Status Settings Screen
The Status screen is shown in Figure 16 and described in Table 14.
Figure 16: Status Functions
Table 14: Status Screen Definitions
Function Description
CARD FAULTS
Displays and faults detected at card level on the cassette
DEVICE FAULTS
Displays and faults detected at device level on the cassette
Refresh
Refreshes all parameters on cassette.
Clear Status Register
Refreshes the status register
ALS
Illuminated state signifies that ALS function is enabled
BACREF
N/A
LPL
Laser Power Low - Illuminated state signifies that there is a
problem with the pump laser
WRMP
Illuminated state signifies that amplifier is warming up (1 minute
warm up time for cassette. Suggested warm up time for
amplifier is 1 hour for optimum stability)
LOS
Illuminated state signifies that LOS is being detected
ILock
Illuminated state signifies that Interlock is enabled
LASER ACTIVE
Illuminated state signifies that pump laser is enabled
To Next Page
Loading...