JDS Uniphase MAP EDFA OAB 1550 - Device Fault Monitor Table; Device Fault Monitor Definitions

37
Device Fault Monitor Table
The Device Fault Monitor table is shown in Figure 12 and described in Table 10.
Device Fault Monitor
Laser Over Temperature
TEC Over Temperature
Laser Fault
Reserved
Reserved
Reserved
Reserved
Exit
Figure 12: The Device Fault Monitor Table
Table 10: Device Fault Monitor Definitions
Function Description
Laser over temperature
Checked box indicates laser has overheated. Set mode to
“Disabled” and contact vendor.
TEC over temperature
Thermo Electric Cooler (TEC) has overheated. Set mode to
“Disabled” and contact vendor.
Laser fault
Checked box indicates laser has encountered difficulties. The
EDFA should be set to “Disabled” and contact vendor.