EasyManua.ls Logo

Jeep Compass - Page 163

Jeep Compass
417 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
162 STARTING AND OPERATING
SHIFT TO PARK TO OBTAIN DRIVABILITY
The gear selector is being moved without the brake pedal pressed while
locked in PARK or NEUTRAL. The transmission will ignore the attempt to
move the selector and stay in NEUTRAL, and display this message.
GEAR NOT AVAILABLE
In AutoStick mode, the gear selected by the driver is not available due to
a fault condition. See an authorized dealer for diagnosis and service.
SHIFT NOT ALLOWED
The gear position requested by the driver is currently blocked. This occurs
if: REVERSE is requested while moving (at 6 mph [10 km/h] or faster), if
DRIVE is requested while moving backwards (at 6 mph [10 km/h] or
faster), or if (in AutoStick mode) THIRD gear or higher is requested at a
stop, or a requested shift would cause engine lugging or overspeed.
Make sure the vehicle is stopped before engaging DRIVE or REVERSE.
SHIFT TO NEUTRAL – THEN D or R
The transmission has shifted itself into NEUTRAL (due to a fault
condition, overheat due to excessive idling when stopped in DRIVE with
the brakes released, or attempting to shift between DRIVE and REVERSE
while the vehicle speed is too high), but the gear selector remains in gear.
Shift into NEUTRAL and then back into gear for continued driving. If the
transmission will not reengage, see an authorized dealer.
AUTOSTICK NOT AVAILABLE
AutoStick mode is unavailable due to a gear selector fault. See an
authorized dealer for diagnosis and service.
MESSAGE DESCRIPTION
21_M6_OM_EN_IN_t.book Page 162

Table of Contents

Other manuals for Jeep Compass

Related product manuals