STARTING AND OPERATING 163
AUTOMATIC MODE NOT AVAILABLE
The transmission is unable to shift itself automatically, due to a fault
condition. Use the AutoStick mode to shift the transmission manually.
See an authorized dealer for diagnosis and service.
TRANS. HOT – PULL OVER SPEED UP OR REDUCE SHIFTING
The transmission driving clutch is overheating, usually due to repeated
launches in stop-and-go traffic. Pull over and allow the transmission to
cool in NEUTRAL until “TRANS. COLD – READY TO DRIVE” is displayed.
TRANS. HOT STOP SAFELY SHIFT TO P
The transmission driving clutch has overheated. Pull over, shift the
transmission into PARK, and allow the vehicle to cool until “TRANS. COLD
– READY TO DRIVE” is displayed.
TRANS. COLD – READY TO DRIVE The transmission has recovered from the clutch overheating.
SERVICE TRANSMISSION
A transmission fault has been detected. See an authorized dealer for
diagnosis and service.
SERVICE SHIFTER
A gear selector fault has been detected. See an authorized dealer for
diagnosis and service.
SERVICE SHIFTER continue in D – Do not Shift or turn engine Off
A gear selector fault has been detected. See an authorized dealer for
diagnosis and service.
MESSAGE DESCRIPTION
21_M6_OM_EN_IN_t.book Page 163
To Next Page
Loading...
