~
VM9213
Dialed Calls
The Dialed Calls list retrieves the list of dialed numbers from
your phone. The last dialed number
is
the first number on the
list. Touch the Dialed Calls menu option to view the list.
To
make a call from the Dialed Calls list, touch the number and
then touch the
~
button. The TFT will display "Cannot get
dialed record" when the feature
is
not available.
Received Calls
Use the Received Calls list to view the last 10 received
numbers stored on your phone.
To
access the Received list,
touch the Received Calls menu option. The last received
number is the first number
on
the list.
To
make a call from the
Received Calls list, touch the number and then touch the
~
button. The TFT will display "Cannot get received record"
when the feature
is
not available.
Phone
Book
1.
Touch the Phone Book menu option to display the
phone book stored
on
your mobile phone, if compatible.
The screen will display "Ready..." while the phone book
is
downloading.
2.
Once the download
is
completed, you can use the arrow
buttons and scroll bar
on
the right side
of
the window to
navigate the list. Since the unit downloads one page
of
entries at a time, there may be a slight delay while the
next page
of
numbers
is
downloaded.
3.
Touch to highlight the number you want to dial and then
touch the
~
button.
NOTE: Some
mobile
phones do
not
support
Phone
Book
upload
through
Bluetooth. This is a limitation
of
the
phone,
not
the VM9213.
Bluetooth
Setup
Auto
Answer
You
can choose to have the VM9213 automatically answer
incoming calls to your paired Bluetooth phone.
To
turn "Auto
answer" on:
1.
Touch the
~
button to view the SETUP menu.
2.
Select the "Bluetooth" sub-menu.
3.
Touch the area to the right of "Auto answer" to select
"On".
Auto
Connect
The auto Connect option will allow the VM9213 to
automatically connect to your previously paired Bluetooth
when it
is
in range. When the Connect option
is
set to
"Manual", you must press the
~
button to re-establish a
connection with your phone.
To
turn auto "Connect"
on:
a
h
1.
Touch the
~
button to view the SETUP menu.
2.
Select the "Bluetooth" sub-menu.
3.
Touch the area to the right of "Connect" to select "Auto".
Advanced
Audio
Distribution
Profile
(A2DP)
The VM9213 allows you to play back audio files from your
phone, PDA or personal music player using a Bluetooth
connection.
Before using an audio player, it may be necessary to enter a
PIN code into the unit. Enter the PIN code referring to
"Bluetooth Sub-menu Features" on page 1
O.
NOTE: Please
quit
A2DP
mode
before attempting to
make
a
phone
call, as unexpected results
may
occur
depending on
your
mobile
phone
model.
The VM9213 can control a Bluetooth audio player via
Advanced Audio Distribution Profile (A2DP)
or
AudioNideo
Remote Control Profile (AVRCP). Bluetooth audio players (or
Bluetooth adapters) compatible with these profiles can be
connected to this unit. Functionality varies depending
on
the
profile used.
21
To Next Page
Loading...
Need help?
General
