~
VM9213
INTRODUCTION
~
..
-.;,.
..
<"
Congratulations on
your
purchase
of
the Jensen VM9213
Mobile Multimedia Receiver.
It's a good idea to read all
of
the instructions before beginning
the installation. We recommend having your Jensen VM9213
installed by a reputable installation shop.
Features
DVD
Aspect Ratio - Full and Normal
Fast Forward - 2X, 4X,
8X
and
20X
Slow Motion - 1/2, 1/4, 1/6 and 1/7
Play, Pause, Stop, Next Chapter and Previous Chapter
CDIMP31WMA
ID3 Tag Compatible
Directory Search (MP3 /
WMA
Only)
Direct Track Access via Remote Control
Burn up to 1500
MP3
and
WMA
Files onto a DVD+R /
RW
Audible Forward / Reverse Track Search (CD-DA Only)
Random, Repeat and Intro
Play, Pause, Stop, Next Track and Previous Track
Tuner
USA, A. America
1,
Arabia, China,
S.
America 2,
Europe, Korea Frequency Spacing
30 Station Presets (18 FM
/12
AM)
Auto Stereo / Mono
Auto Store
Chassis
1.0 DIN (Import / ISO-DIN Mountable)
Motorized Flip-Out / Flip-Up LCD Screen
8 Character /
Segment
Type Secondary LCD Display
7"
TFT
Active Matrix LCD with Anti-Glare Coating
336,960 Sub Pixels
(1440W
X 234H)
Pixel Pitch -
0.321W
X 0.370H
Screen Tilt / Angle Adjustment
Beep Tone Confirmation (On-OFF Option)
Heat Management System - Forced Air Cooling to keep
the chip sets operating at nominal temperatures
General
Navigation Ready (NAV102 Only)
Bluetooth Ready (with purchase
of
BTM10) providing
hands-free profile for safety / convenience and A2DP
profile for streaming music from a
PDA
/ PMP
44-Key Infrared Remote Control
Composite Video Output for an Additional Screen
Two Audio / Video Auxiliary Inputs for Game Console,
Camcorder, Navigation, etc.
Three-Band Tone control (Bass, Mid and Treble) with
Eight Preset EQ Curves
Front, Rear and Subwoofer Line Output
Programmable Volume Control
Rear Camera Input (Normal and Mirror Image View)
Touch Screen Calibration Mode
100-0hm
Preamp Line Output - All Audio Channels
2VRMS Line Output - All Channels
Rotary Encoder Audio Control
RCA
AudioNideo
Input
SWC
Interface - Compatible with PAC adapter SWI-PS
Steering Wheel Control Interface, sold separately
Optional
Equipment
NAV102
The VM9213 is "navigation ready." Before accessing
any
navigation features, you must purchase and install
the navigation module (NAV102). All installation and
operating instructions will be included with the
navigation module.
Once the navigation module
is
connected and operating
properly, the NAV source mode will become active.
While the navigation module is not installed, the NAV
option appears gray, indicating the function is not
available.
BTM10
Before you can connect to a Bluetooth enabled device,
you must purchase and install the Jensen BTM10.
Bluetooth
Phone
See "Bluetooth Operation" on page 19.
Rear Camera
The VM9213 is "camera ready." Before accessing any
camera features, you must purchase and install a rear
video camera. Once the rear camera is connected and
operating properly, the
CAMERA
source mode will
become active. While the camera is not installed, the
CAMERA
option appears gray, indicating the function
is
not available.
WARNING! To reduce the
risk
of
a traffic
accident
(except
when
using
for
rear view video camera
or
navigation)
never
use the video display function while
driving
the
vehicle. This is
a violation
of
federal law.
WARNING! Never disassemble
or
adjust
the unit.
1
WARNING! To
prevent
injury
from
shock
or
fire,
never
expose this
unit
to
moisture
or
water.
WARNING! Never use irregular discs.
WARNING!
To prevent damage to the mechanism
inside
this unit,
avoid
impact
to
the TFT monitor.
WARNING! Using an
improper
fuse
may
cause damage
to the
unit
and
result
in
a fire.
WARNING! The
monitor
employs an automatic
motorized
mechanism. To
prevent
damage to the core mechanism,
please do
not
push,
pull
or
swivel
the
monitor
manually.
To Next Page
Loading...
Need help?
General
