JMA Wireless POWERBOOST DC Converter System 1.5 User Manual

PowerBoost DC Converter System 1.5: Quick Start Guide
16995-01 rev. D
This document contains proprietary information. No part of this document should be reproduced
or distributed beyond its intended recipients without the express written consent of JMA Wireless. 53
Upper
xOVP
Mode switch
“Tower Dot”
4-wire “D”
comm
Upper
xOVP
Mode switch
“Tower Dot”
4-wire “D”
comm
Upper
xOVP
Mode switch
“Tower Dot”
4-wire “D”
comm
Lower
xOVP
Mode switch
Base2
VBOOST
IN OUT
Lower
xOVP
Mode switch
Base1
VBOOST
IN OUT
Lower
xOVP
Mode switch
Base0
VBOOST
IN OUT
PowerBoost
VBOOST
IN
All Upper OVP
mode switches
typically set full
CCW “Tower Dot”
Lower OVP mode
switches sequence
BASE0, BASE1,
BASE2…
Channel mapping:
When mode
switch is set to
“BASE0”, the
RS485 telemetry
tags channels as:
CH1 = 101
CH2 = 102
CH10 = 110
…and so on
These channel
tags are used
within Orion to
identify the
channels for
mapping.
Channel mapping:
When mode
switch is set to
“BASE1”, the
RS485 telemetry
tags channels as:
CH1 = 201
CH2 = 202
CH10 = 210
…and so on
These channel
tags are used
within Orion to
identify the
channels for
mapping.
Channel mapping:
When mode
switch is set to
“BASE2”, the
RS485 telemetry
tags channels as:
CH1 = 301
CH2 = 302
CH10 = 310
…and so on
These channel
tags are used
within Orion to
identify the
channels for
mapping.

JMA Wireless POWERBOOST DC Converter System 1.5 Specifications

General

Brand	JMA Wireless
Model	POWERBOOST DC Converter System 1.5
Category	Media Converter
Language	English