Warning！
● All the operation and wiring work should be operated by professional electrical
or machine engineer.
● Please do not close any breakers before all the equipments are not fully
connected well.
Notice！
● All the electrical installation must meet the electrical installation standard of
local and country.
● In order to ensure safe running, proper grounding, using appropriate conductor
size and providing short circuit protection are required.
● Connection cable must select suitable specification, firm connection and
good insulation.
Danger！
● DC connect need to be turned off firstly, and ensure that it has really no voltage.
● Please don’t plug any connectors under inverter charged state!
● Please don’t open the cover plate under inverter charged state!
To Next Page
Loading...
