Jntech JNP75KH - Basic Information

46
ErrCode
The most recently error mode.
StopCode
Stop code, can check the reason of inverter shut down most
recently.
S-Mode
Start and stop mode.
D-Mode
Protection mode against well dry out.
OF-F
Water overflow alarm function optional in PV pump system
storage device.
Run/Stop
Run /stop status.
ESC
Return to the previous menu.
8.3.2 Basic Information
InverterInfo, shows basic information of inverter, please refer to the figure
below.
Figure8-7 Procedure of information inquiry
Table8-6 Detail information of inverter
InverterInfo
Explain