EasyManua.ls Logo

Jntech JNP75KH - Installation; Installation Site Requirements

Jntech JNP75KH
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
5 Installation
5.1 Installation Site Required
Inverter installation site environment has very important influence to the safe
operation, the performance and life of the inverter. Choose the right installation
site before install the inverter.
Figure5-1 Installation Direction
All installation must comply with local standards.
Do not install the inverter at a flammable or explosive place or a place where the
flammable or explosive materials are stored.
Do not install the inverter in a place where there is a risk of explosion.
Do not install the inverter in places where the inverter is vulnerable to
lightning strike.
Do not install the inverter in a higher salt spray environment
Inverter installation site must be in good ventilation, do not install the
inverter in the closed case, otherwise the inverter will not work properly.
Inverter protection level is IP65, can be installed outdoor, when the

Table of Contents

Related product manuals