Joab Hookmaster User Manual

7
Body Standard
The use of bodies that are not designed in accordance with the standard SS 3021
can lead to personal injury or environmental damage. JOAB accepts no responsibility
for the use of bodies that do not conform to the standard: SS 3021.
JOAB's hook-lifts are intended for handling bodies that meet the Swedish standard SS 3021.
The following are the most important requirements of the SS 3021.
Internal mechanical lock that locks the body
onto the hook-lift. Thisisoptional equipment.
Cut-outs in the body's frame. These are used
to hydraulically lockthe body onto the hook-lift.
Holes in the body's rear beam. These are used
to secure the body onto a trailer.
Modification in the body that allows the hook-lift
to lock the body onto the hook-lift with the use
of locking arms (optional).
The body must have a stop member that pre-
vents the body from moving forwards and into
the cab of the vehicle.
Internal holes located in the body's frame mem-
bers are used to lock the body onto a trailer.
Hookmaster manual: 13293 Edition 6 | 2021-02-22

Joab Hookmaster Specifications

General

Brand	Joab
Model	Hookmaster
Category	Lifting Systems
Language	English