EN - 27
5.7 Mounting and Demounting Motorcycle
tires
To mount and demount motorcycle tires it is necessary to
utilize the optional motorcycle adaptors EAA0329G53A (4
piece) and EAA0247G14A Motorcycle bead breaker blade.
The bead-breaking, mounting and demounting technique
is the same as per car tires.
MOTORC Y CLE RIM S M U ST A LWAY S BE
CLAMPED FROM THE OUTSIDE.
AIR PRESSURE TO THE TIRE CHANGER MUST
NOT EXCED 140 PSI (10 BAR) WHEN CLAMPING
MOTORCYCLE RIMS.
To Next Page
Loading...
