EasyManua.ls Logo

Johnson Controls HICM008B21S - Function Setting Details; Function Selection Items (Continued)

Johnson Controls HICM008B21S
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-22
SM-18003
EXTERNAL INPUT/OUTPUT AND FUNCTION SETTING
NOTES:
1. Waitatleast3minutesfrominitialpowerONtochangetheoptionalsetting.
2. Whenchanging“CF”setting(“ChangeofLouverSwingAngle”),restorethepowersupplyortestthelouver
swingacoupleoftimesintheautoswingmodetovalidatethesetting.
3. Theoptionalsettingsaredifferentaccordingtotheindoorandoutdoorunitmodels.
Checktoensureiftheunithastheoptionalsettingornot.
4. Theaboveoptionalfunctionswith“X”markattheindividualsettingcanchangetheconditiononlywhen“All
Rooms”isselectedintheTestRunMenu>FunctionSelectionMenu.
5. Functionselectionitems"q1"to"S8"areavailableonlyforindoorunitsandwiredcontrollerswithnew
softwareapplied.Checktoensureiftheunithastheoptionalsettingornot.
*1): The“02”settingmaynotbeavailableaccordingtothetypeofindoorunit.
*2): Incasethatthesettemperatureischangedandthetemperatureiskeptforaspecictimesetby“F4”,it
automaticallychangestothetemperaturesetby“F5”or“F6.”(Incasethatthesettemperatureof“F5”and
“F6”isoutofrange,theupperorlowerlimittemperatureisapplied.)
*3): Applicabletofan,coolinganddryoperationmodes.
*4): Applicabletoheatingoperationmode.
*5): Operationisstoppedbypressingthe“
”(On/Off)buttonfor3seconds.
*6): Thesensorvalueat“C8”willbeindicated.Whenthethermistorforwiredcontrollerisused,theaverage
valueofthethermistorforwiredcontrollerandthethermistorforindoorinletwillbeindicated.
*7): Whentheunitisrestartedbythewiredcontroller,thetemperatureautomaticallychangestothesetting
temperatureof“F5”or“F6”.
No. Items Optional Function
Individual
Setting
Setting
Condition
Contents
133 r5 Not Prepared - - Not Used
134 r6 Not Prepared - - Not Used
135 r7 Not Prepared - - Not Used
136 r8 Not Prepared - - Not Used
137 r9 Not Prepared - - Not Used
138 rA Not Prepared - - Not Used
139 rb Not Prepared - - Not Used
140 S1 Not Prepared - - Not Used
141 S2 Not Prepared - - Not Used
142 S3 Not Prepared - - Not Used
143 S4 Not Prepared - - Not Used
144 S5 Not Prepared - - Not Used
145 S6 Not Prepared - - Not Used
146 S7 Not Prepared - - Not Used
147 S8 Not Prepared - - Not Used

Table of Contents

Related product manuals