5407935-UUM-D-1119
42 Johnson Controls Ducted Systems
Geo-Fencing
Use the toggle button to enable or disable the Geo-Fencing feature.
Move the slider to specify a region within 1–25 miles from your home.
When enabled, the Geo-Fencing feature triggers specific actions when
your smart device enters or exits the specified region. When your smart
device exits the region, you receive a notification to remind you to set
Away mode. When your smart device enters the region, Home mode is
automatically enabled and the setpoints change to the Home setpoints.
NOTICE
You must enable Locations and Notifications on your smart device for
the Geo-Fencing feature to function. The Geo-Fencing screen may
vary between smart devices.
Figure 57: Geo-Fencing
Tap here to check your Settings
When you leave the region, a notification will be sent to you
to set “Away Mode”. When you enter the region, “Home Mode”
will automatically be enabled.
In order for Geo-Fencing to operate, ensure “Notifications”
is enabled and “Location” access is set to “Always” under
your smart device Settings.
25mi1 mi
Geo Fencing
Toggle On or Off
Region Slider
Thermostat Home
Region Diameter
in Miles
A1226-001
To Next Page
Loading...
Need help?
General
